Dimplex HFPI9280 Indoor Fireplace User Manual


 
13
HFPI9280, DFPI2311
If the unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
TO REPLACE THE HEATER ASSEMBLY
1. Remove the glass doors and trim from the unit and remove it from the opening.
2. Unscrew the screws located in the middle of the top and the two screws at the back of
the top.
3. Remove the top being careful not to damage any of the attached wiring.
4. Remove the heater mounting screws from the top of the unit.
5. Disconnect the wiring clips and connections noting their original locations and remove
the heater assembly.
6. Properly orientate the replacement heater assembly and connect all of the wiring clips
connections in their original locations.
7. Reassemble in the reverse order as above.