Dimplex DFG3033 Indoor Fireplace User Manual


  Open as PDF
of 24
 
8 www.dimplex.com
Fireplace Installation
① 
into the mantel (refer to mantel
assembly instructions).
!
NOTE 1: 
circuit is required. A dedicated
circuit is preferred but not
essential in all cases. A
dedicated circuit will be
required if, after installation,
the circuit breaker trips or fuse
blows on a regular basis when
the heater is operating.
Additional appliances on the
same circuit may exceed the
current rating of the circuit
breaker.
!
IMPORTANT: If not using a

must be installed in an
enclosure with the following
minimum internal/opening
dimensions (Figure 1).
New Wall Construction
①
Select a suitable location that
is not susceptible to moisture and
is away from drapes, furniture and

② 
desired location to see how it will
look in the room.
③ Mark the desired location on

a safe, dry and dust free location.
④ 
opening of 31 ¾ inches (807 mm)
wide x 22 ¾ inches (578 mm)

Option #1
be lead from behind the trim and
along the wall to an outlet near

Option #2
installed inside the new frame
construction. Plug the unit into

cord does not reach, you may
use an extension cord rated for a
minimum of 1875 Watts.
Figure 1
22 ¾”
(578 mm)
31 ¾”
(807 mm)

(241 mm)
 previous next