Filter
Top Products
13
Operation
On/Off button on the remote
control transmitter.
⑥ Release the Initialization
⑦ Press the Flame/Heat On/Off
button
to turn the Flame/Heat
function on.
Frequency Interference
properly to the remote control,
the remote operating frequency
may have to be reset. The
remote control can send another
frequency code to the circuit
board to eliminate interference.
① Simultaneously press the
“Temperature Down” button and
the “Flame Speed Down” button
on the remote control (Figure 7).
② “COD” will appear in place of
the sleep timer digits.
③ Release the “Temperature
Down” button and the “Flame
Speed Down” button.
④
on the unit (Figure 5C).
⑤ Press the Flame/Heat On/Off
button on the remote.
Your remote will now have a
different frequency