Filter
Top Products
www.desatech.com
113084-01E 27
ACCESSORIES
Purchase these heater accessories from your local
dealer. If they can not supply these accessories,
call DESA Heating Products at 1-866-672-6040
for referral information. You can also write to the
address listed on the back page of this manual.
EQUIPMENT SHUTOFF VALVE
GA5010
For all models. Equipment shutoff valve with 1/8”
NPT tap. Fits 1/2” NPT pipe.
RECEIVER AND HAND-HELD
THERMOSTAT REMOTE CONTROL
KIT - HRC200
For remote-ready models. Allows the gas log
heater to be operated in a manually or thermostati-
cally controlled mode. You can turn the gas log
heater on and off without ever leaving the comfort
of your easy chair. A wall-mount docking station
is included.
RECEIVER AND HAND-HELD
REMOTE CONTROL KIT - HRC100
For remote-ready models. Allows the gas log
heater to be turned on and off by using a hand-held
remote control. A wall-mount docking station is
included.
WALL-MOUNT THERMOSTAT
SWITCH - GWMT1
(Not Shown)
For remote-ready models. The desired comfort
setting can be selected on the wall thermostat and
the log heater will automatically cycle from pilot
to the heat setting selected.
WALL-MOUNT ON/OFF SWITCH
GWMS2
(Not Shown)
For remote-ready models. Allows the gas log
heater to be turned on and off with a wall switch.
CLEANING KIT - GCK
(Not Shown)
For all models. Your vent-free gas appliance re-
quires regular cleaning and maintenance to prevent
performance problems. This kit gives you the tools
and instructions to make it easy to clean all critical
areas of your appliance.
INFORMATION VIDEO - 108917-01
For all models. A care and maintenance video is avail-
able by calling 1-866-672-6040. You may also email
your request to productsupport@desaint.com.
FIRE CRACKLE - CF6-A
(Not Shown)
For all models. Creates the sound of a real burn-
ing re.
STOVE HEARTH BASE - GC10SP
(Not Shown)
For all models. Hearth base stained oak nish. Re-
quired when stove is placed on carpet. Dimensions
4" x 35
3
/
4
" x 30
1
/
2
" (H x W x D).
STOVE CONVERSION KIT - 113051-01
For models using SVYD18NR/PR vent-free
stove inserts. This kit supplies stove back panel,
stove dropped bottom and needed hardware to
mount the vent-free heater into the stove.