Desa M42(B,H) Indoor Fireplace User Manual


  Open as PDF
of 32
 
www.desatech.com
108795-01V16
INSTALLATION
Continued
LOGPLACEMENTFORM42,M42P,
VM42 AND VM42P MODELS
1. Place large back log (log 1) onto grate
making sure notches rest over grate (see
Figure 29).
2. Insert lower end of log 2A between rst
two grate ngers and position upper end
into notch on front of log 1. See Figure 29.
Place log 2B on front right side of grate as
shown in Figure 29.
3. Place log 3 into notch on top left of log 1,
resting lower end on left two grate ngers
(see Figure 30).
4. Place upper end of log 4 into notch on log
1 as shown in Figure 30. Rest lower end
of log 4 on middle grate nger as shown
in Figure 31.
5. Place upper end of log 5 into notch on top
inner right of log 1 (see Figure 31). Rest
lower end of log 5 on middle grate nger
as shown in Figure 32.
6. Place log 6 into notch on top right of log
1 (see Figure 31). Rest lower end of log
6 on top of log 2B (see Figure 32).
As an option to enhance the look of the hearth,
you may place the lava rock provided around
front and sides of burner pan.
NOTICE: Donotput lavarock
insidetheburnerpanoraround
theairmixertting.Placinglava
rock inside the burner pan or
blockingtheopeningsofthepro-
pane/LPair-mixercouldcause
performanceproblems.
Figure 29 - Installing Logs 1, 2A and 2B
Log 2A
Log 2B
Log 1
Notch
Figure 30 - Installing Logs 3 and 4
Log 4
Log 3
Log 1
Notches
Figure 31 - Installing Logs 5 and 6
Figure 32 - Logs Installed for M42, M42P,
VM42 and VM42P Models
Log 6
Log 5
Notch
Log 1
Log 2B
 previous next