Filter
Top Products
www.desatech.com
119421-01A16
INSTALLATION
Continued
Figure 19 - Installing Middle Log #2
Figure 20 - Installing Back Log #3
Middle
Log (#2)
Tab
Burner
U-Shaped
Slot
Hole in
Grate Base
Pins
Burner
Back
Log (#3)
Figure 18 - Installing Front Log #1
Front
Log (#1)
Grate
Fingers
Grate
Base
3. Locate pins on bottom of back log (#3). Slide
these pins into holes in grate base behind
burner (see Figure 20).
4. Locate holes on bottom of right crossover log
(#4). Slide holes onto right pin on middle log
(#2) and right pin on back log (#3). See Figure
21 for placement.
5. Locate holes on bottom of middle crossover
log (#5). Slide holes over middle pin on
middle log (#2) and left pin on back log (#3).
See Figure 21.
6. Locate holes on bottom of left crossover log (#6).
Slide these holes onto left pins located on middle
log (#2) and front log (#1). See Figure 21.
7. Add lava rock around base of heater if de-
sired. Do not place any lava rock on logs or
burner.
Figure 21 - Installing Crossover Logs