Filter
Top Products
4
FEATURES
OP36 Features
• An electronic control panel which allows the user to control the unit’s operation easily.
•
Dual fan speeds (either High or Low) in both COOL and Fan Only modes.
• A digital display that indicates the Temperature SET POINT (either Fahrenheit or
Celsius) in which the COOL Mode will operate. This is also the temperature the unit
will try to maintain. The Temperature SET POINT can be adjusted by the SET TEMP
buttons (
▼
/
▲
). (65ºF-95ºF)
• A condensate drain TANK FULL indicator display (LED).
• An automatic restart feature when the power is lost and regained. The unit will return
to the operating mode it was in prior to the loss of power. Any preset program will be
retained in the memory in the event power loss occurs.
• A programmable Clock/Timer function. This allows the user to program a specifi c
time of day that the unit will begin to
operate/start and turn off/end.
• A 2-digit room temperature display.
• Two condensate tanks with condensate fl oat
OPERATION
Control Panel
Before operating the unit, it is important to familiarize yourself with the basic controls
located on the control panel.
1.
C
OOL
O
N
/O
FF
Button - Activates/deactivates
the C
OOL
mode/turns the unit off.
2.
FAN ON/OFF Buttons - Activates/deactivates
the HIGH or LOW fan mode.
3.
S
ET TEMP
Buttons (
▼
/
▲
) - Increases/decreas-
es the temperature set point.
4. T
ANK FULL
4. TANK FULL4. T
LED - Flashes when the drain tank
is full.
5.
S
ET POINT
Display - Indicates the current tem-
perature set point; also used to display clock
hour when programming.
6.
R
OOM TEMP
Display - Indicates the current
room temperature; also used to display the
clock minutes when programming.