Filter
Top Products
3
UNLOCKED
LOCKED
FRONT AND BACK HANDLES
Moving the Unit
Unlock the casters and push the MovinCool unit, using the side handles, to a fl at, level
Plugging in the Unit
• Check the prongs and surface of the power cord plug for dust/dirt. If dust and/or dirt
are present, wipe off with a clean, dry cloth.
• Check the power cord, plug and prongs for damage or excess play. If any damage or
excess play is found, contact your MovinCool reseller for repair.
• Fully insert plug into the A/C outlet.
WARNING:
• If the power cord or plug is damaged, repair should only be performed by quali-
fi ed electrical personnel.
• Do not connect/disconnect the power cord or attempt to operate buttons with
wet hands. This could result in electrical shock.
CAUTION: The AC outlet (208/230 VAC Single Phase, 60Hz) needs to be rated at
30A or higher. Do not share the outlet with any other instrument or equipment.
NOTE:
• Make sure the AC outlet is free of dirt, dust, oil, water, or any other foreign mat-
ter.
• The Offi ce Pro 36 model is equipped with an approved NEMA plug confi guration
(6-30). The appropriate outlet must be used for this plug type.
surface and set the casters back to the LOCKED position.