Filter
Top Products
4
Pressure Testing & Flushing the Installation
Prior to testing, break off plasterguard caps
(1) and completely thread on the pressure
testing caps (2). Ensure the bonnet nuts
are properly tightened, and plug both
outlets with proper fittings. Check for leaks.
After testing remove shower and/or tub spout
plug and flush system. After flushing remove
filter screen (see step 2) and reinstall cap,
bonnet and cover.
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
9