Filter
Top Products
6
ASSEMBLY INSTRUCTIONS
The Air Cleaner requires very little assembly; therefore, determine in which position the Air Cleaner will be used -
on the floor, bench or overhead. If the Air Cleaner will be used as a mobile unit, proceed to USING THE AIR
CLEANER O N A BENCHORFLOORSURFACE section. If ceiling mounting is desired, proceed to section
MOUNTING THE AIR CLEANERTO A CEILING O R OVERHEADSUPPORT.
IMPORTANT:When determining a location to mount the air cleaner, the unit will operate more efficiently
when the air flow is unrestricted. Do not locate the unit in a corner or near any heating or cooling vents.
USING THE AIR CLEANER O N A BENCH O R
FLOOR SURFACE
1. Locate (4) self-adhesive rubber feet (A) Fig. 3, sup -
plied with the unit. Carefully place Air Cleaner on a firm
supporting surface so there is access to the bottom of the
cabinet as shown in Fig. 3. Apply one self-adhesive
rubber pad (A) Fig. 3, to bottom at each corner of air
cleaner cabinet. The rubber feet will help eliminate vibra -
tion and the possibility of the air cleaner walking across
the work or floor surface.
For operator safety, we suggest that the unit be
clamped down when used on a work bench or posi-
tioned on sawhorses.
Fig. 3
2. There are two convenient lifting handles located on each side of the cabinet as shown in Fig. 4, to assist in carry -
ing the unit from one place to another. To avoid damage to the air filters, carry the air cleaner with the filters positioned
away from your body. CAUTION: THIS TO O L WEIGHS APPROXIMATELY 50 POUNDS.
Fig. 4
A