Filter
Top Products
13
Remote control functions
75
F
AIR-CONDITIONING MODE
•Press the button (I) to turn the appliance on.
• The symbol flashes on the display and a “beep” indicates that
the air-conditioning unit is on.
• Press the MODE button (A) a number of times until the air-condi-
tioning symbol appears on the display.
• Now set the temperature using the buttons.
• To select fan speed, press the SPEED button (C) repeatedly until the
required fan speed is selected (automatic, high, medium, low).
NB: in air-conditioning mode, the appliance automatically removes
excess moisture from the atmosphere.
DEHUMIDIFYING
• Activate this function when humidity is high.
•Press the button (I) to turn the appliance on. The symbol
flashes on the display and a “beep” indicates that the air condi-
tioner unit is on.
•Press the MODE button (A) a number of times until the dehumi-
difying symbol appears on the display.
• Set the required humidity level using the buttons.
• In dehumidifying mode, fan speed is selected by the appliance
automatically.
• Place the appliance in the room without fitting the air exhaust hose.
FAN MODE WITH AIR FILTRATION
In humid but not particularly hot days, the fan function alone may
be adequate.
•Press the button (I) to turn the appliance on. The symbol
flashes on the display and a “beep” indicates that the air-condi-
tioning unit is on.
•Press the MODE button (A) a number of times until the fan sym-
bol appears on the display.
• Once purifying mode has been selected, press the SPEED button
(C) until the required speed is reached (low, medium, high).
BOOST FUNCTION
“BOOST” function is used to obtain rapid cooling. The fan is set to
high speed and the temperature is automatically set to 64°F (18°C).
To select “BOOST” function, proceed as follows:
•Press the button (I) to turn the appliance on. The symbol
flashes on the display and a “beep” indicates that the air-
conditioning unit is on.
•Press the BOOST button (H) to set the function. The symbol is
displayed.
•To go back to the previous mode, press the BOOST button again.
With the “BOOST” function activated, the display on the control
panel shows .
SMART FUNCTION
In “SMART” function, the air-conditioning unit decides the best way
to operate to guarantee maximum comfort.
•Press the button (I) to turn the appliance on. The symbol
flashes on the display and a “beep” indicates that the air-
conditioning unit is on.
•Press the SMART button (G). The appliance functions automati-
60
%RH