Filter
Top Products
32
Selecting functions
SMART MODE
In SMART mode, the air-conditioning unit decides the best way to
operate to guarantee maximum comfort.
•Press the button to turn the appliance on. A beep indicates
that the air-conditioning unit is on and the symbol flashes on
the display.
•Press the SMART button. The appliance functions automatically
and the symbol appears on the display.
NB: in SMART mode, temperature is controlled automatically.
However, if the required temperature has not yet been reached,
it can be reduced or increased by a maximum of 2° C by pres-
sing the buttons.
.
It should be pointed out that when the automatic ventilation func-
tions are activated, the appliance itself will choose the proper
speed.
AUTOMATIC SLEEP MODE
The automatic SLEEP mode is ideal for the night-time as it enables
operation of the air-conditioning unit in any of the modes (air-con-
ditioning, dehumidifying, fan or SMART) to be gradually reduced
until it shuts down completely (after eight hours). To select SLEEP
mode, proceed as follows:
•Press the button to turn the appliance on.
•A beep indicates that the air-conditioning unit is on and the
symbol flashes on the display.
•Press the MODE button a number of times until the symbol of the
function required appears on the display.
• Then select the required temperature by pressing the but-
tons.
• Now press the SLEEP button to set the night function. The
symbol is displayed. Press the SLEEP button again to go back to
the previous mode. In this mode, the fan operates at low speed.
N.B: The night-time function makes it possible to keep a room at a perfect tem-
perature, thus preventing an excessive rise or a drop in temperature while the silent
operation is in effect. The air-flow will decrease, while the room temperature will
vary gradually to provide the ideal condition: the temperature will increase by 1°
C. after 60 minutes and by 2° C. after two hour (it goes off altogether after 8 hours).
Low
Low
High
High
°C
HR