Filter
Top Products
30
Description of the remote control
REMOTE CONTROL
Inserting the batteries
• Slide the cover as shown in figure.
•Insert two new batteries (not rechargea-
ble) making sure the (+) and (-) are in the
correct positions.
• Put the cover back on, letting it slide into its
original position.
• The Display will show all of the remote con-
trol's symbols for several seconds.
Note: WE SUGGEST USING ALKALINE BATTE-
RIES (LR03).
If the remote control is to be replaced or
thrown away, the batteries must be remo-
ved and disposed of in accordance with
the current laws as it represents an environ-
mental hazard.
When the remote control unit batteries are
replaced, the air-conditioning indicator
and heating indicator will flash alterna-
tely on the remote control unit liquid crystal
display.
To set the remote control unit correctly, while
is displayed, press any button.
If you do not press a button within 12 seconds,
the remote control unit will also make the
heating mode available, despite the fact
that this function is not available with this
appliance.
PROPER USE
• Point the remote control unit towards the
air-conditioning unit signal receiver .
• Maximum distance: about seven (7)
metres (without any obstacle between
remote control and receiver).
• The remote control must be handled with
great care: do not drop it, expose it to
direct sunlight, or leave it close to heat
sources.
15