Filter
Top Products
31
ENGLISH
Operation
ROOM TEMPERATURE BUTTON (MODEL FX400ECO)
When pressing this button (R), the room temperature is shown on the display for a few seconds. It
then reverts to showing the current mode. The room temperature cannot be displayed while in
Stand-by mode.
SELF-DIAGNOSIS
The appliance is equipped with a self-diagnosis system which identifies any operating problems.
IF THE DISPLAY SHOWS… ….WHAT SHOULD YOU DO?
HH PP
HIGH PRESSURE
Insert and re-insert the plug. If the problem persists, call the service
centre.
LOW TEMPERATURE
If the machine is operating as an air-conditioner or dehumidifier, this
will prevent the formation of ice. The appliance will start up auto-
matically once the defrosting process has ended.
FF FF
FAN FAILURE
PP FF
PROBE FAILURE
If either of these messages appears, call the service centre.
FULL TANK
FX160ECO
Empty the tank at the rear of the appliance and reposition correc-
tly.
FX400ECO
Empty the internal tank (not visible) through the small drain tube
(11); replace the rubber stopper.
FX160/400ECO GB 20-06-2002 16:51 Pagina 31