Filter
Top Products
3
extension cord or relocatable power tap (outlet/power strip).
20.Be sure that the plug is fully inserted into an appropriate outlet. Please
remember that outlets also deteriorate due to aging and continuous use:
check periodically if signs overheating or deformations are evidenced by the
plug. Do not use the outlet and CALL your electrician.
21.Make sure that no pieces of polystyrene or other packaging material have
been left between one element of the appliance and another. It may be
necessary to pass over the appliance with a vacuum cleaner.
22.When switching on the appliance for the first time, allow it to run at full
power for about two hours to get rid of the unpleasant smell Make sure
that the room in which the appliance is located is well ventilated during
this operation. It is normal for the appliance to emit small cracking sounds
when you turn it on for the first time.
23.Do not cover the appliance while it is functioning in order to avoid overhea-
ting with the attendant risk of fire.
SAVE THESE INSTRUCTIONS
HOW TO USE YOUR HEATER
"EASY WHEEL" SYSTEM
Turn the radiator upside-down on a rug or a soft surface in order to prevent damaging
the paint finish. Fully unfold the castors by turning them outwards (Fig. 1).
Turn the radiator back to its upright position.
LOCATION
Place the radiator on the floor beneath coldest window in the room or any desired loca-
tion. Your heater will minimize the effect of cold drafts. The heater must not be placed
immediately below a power-outlet. Do not use this radiator in rooms having a surface
area of less than 43 square feet (4 sq.m.).
POWER CONNECTION
The radiator must be connected to a properly polarized A/C 110/120 V household
outlet in perfect working condition.
Keep loose clothing or bedding, furniture and flammable material away from the power
outlet where the heater is plugged into.
Your product is equipped with a polarized alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your obsolete outlet.
Do not attempt to modify the plug to bypass this safety feature.
fig. 1