Filter
Top Products
7
ENGLISH
How to dehumidify
1. Plug the appliance into the power outlet.The “POWER ON” light will illuminate.
2. Check that the “TANK ON” light is OFF.
3. Turn the humidistat control dial to the desired range or to “CONTINUOUS” for continuous
operation.The Dehumidifying light will turn on.
4. In order to switch off the appliance, turn the humidistat counter clockwise to the end and
unplug from the power outlet.
If you want to discharge the condensate directly into the tank, please check the pump
switch is OFF. (See page 5 for details).
When the humidity in the room has reached the required level,slowly turn the humidistat knob
counterclockwise until the dehumidifying light goes out. The dehumidifier will then keep the
humidity in the room at the selected level automatically.
Note: When dehumidifying,the appliance not only dehumidifies but also slightly warms the air
(2-4°F /1-2°C hotter than room temperature)
Operating conditions
A dehumidifier will not operate satisfactory if room temperature is 65°F (18°C) or lower,or if
the humidity in the room is low. Under these conditions, the dehumidifier should be turned off.
A dehumidifier will not eliminate frost on window during winter.The dehumidifying coil normally
operates above freezing temperatures and cannot prevent moisture from condensing on the
inside of a window pane that is below freezing.
TIP: It may be helpful to use a dehumidifier in the kitchen or laundry area where the humidity is
high. Reducing humidity in these areas may reduce frost on windows in other parts of the
house.
Selecting operating modes