Filter
Top Products
6
Electrical connections/
Description of controls
Tank control system
indicator light
Power-on
Indicator light
Dehumidifying operation
indicator light
pump on/off switch
Condensation Removal
System Indicator light
Humidistat control dial
Tank control system
This dehumidifier is fitted with a special intelligent device to ensure correct operation.
A red indicator light on the control panel comes on to warn the user when:
1. the tank is full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
empty the tank
2. the tank is missing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .replace the tank
3. the tank is in the wrong position . . . . . . . . . . . . . . . . . . .position the tank correctly
4. in continuous drain: the hose is obstructed or the difference in level is
too high . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
remove the obstruction or reduce
different in level.
Once the cause has been eliminated,the light goes out and the appliance resumes operation.
Electrical connections
Before connecting the appliance to the power outlet make sure you read all the safety
instructions and check the following:
• The main power supply must correspond to the power supply shown on the rating plate.
• The power socket and the electrical circuit must be adequate to supply the appliance.
• The power socket must match the plug. If not, have the plug replaced by qualified
personnel.
• The power socket must be adequately earthed.
The manufacturer accepts no responsibility if these safety regulations are not complied with.
Description of controls