Curtain Wall Console Installation Instruction
PRIOR TO INSTALLATION
• Remove Front Inlet Grille and store in a safe place.
• Remove both Filter Assemblies and store with the front inlet grille.
• Remove the two screws securing the Front Cover assembly to the Chassis Assembly.
• Remove the Front Cover assembly
• Two mounting holes, located on the Condenser Back Cover, are now exposed and clearly visible.
• Isolate the area and be sure not to contaminate the Electrical components with dust.
FRONT INLET GRILLE
FILTER ASSEMBLY
FRONT COVER ASSEMBLY
ELECTRICAL CONNECTION
• Ensure that the supply voltage is 230V 50 Hz
• This unit must be earthed and installed in accordance with local municipal safety standards.
• If necessary, ensure that a qualified electrician replaces the mains cable.
810
95
405
410
815
WALL
APERTURE
WALL
SLEEVE
60