Filter
Top Products
TROUBLESHOOTING:
If sensor pair alerts when originally paired, but will not alert when mounted...
1. Push power button on unit ‘A’
2. Look in center hole for the indicator light. If light is on, proceed to step 3. If light is not on, press
power button again. Indicator light should come on.
3. Repeat steps 1 and 2 for unit ‘B’. This will re-sync the units.
If experiencing false alerts...
• Check for obstruction (i.e. branch, frost)
• Extreme fog
• Extreme snow and rain
•
If obstruction/weather are not involved, try changing the frequency of the DCR-2500 and unit ‘A’
• If unit is blocked continually a second signal will be generated after one hour
If no signal...
• Turn power o on all units for 60 seconds and then turn power back on
• Make sure units are still aligned
• Make sure all 8 dip switches in DCR-2500 match the rst 8 dip switches inside unit ‘A’
TECHNICAL SUPPORT: If you encounter any diculty in the operation of this product after
reading the manual, please contact Dakota Alert. You can reach us by phone at 605-356-
2772 from 8:30 AM to 5:00 PM Monday through Friday (Central Standard Time). We will be
happy to answer your questions and help you in any way we can.
WARRANTY: Dakota Alert warrants this product to be free of defects in material and
workmanship for a period of one year from the date of purchase. This warranty does not
cover damage resulting from accident, abuse, act of God or improper operation. If this
product does become defective, simply return it to Dakota Alert. Please include a note
describing the troubles along with your name and return address as well as the original
sales receipt. If the product is covered under warranty it will be repaired or replaced at no
charge. If it is not covered by warranty, you will be notied of any charges before work is
done.
7