Filter
Top Products
READ MANUAL THOROUGHLY BEFORE INSTALLATION. RETAIN MANUAL FOR FUTURE
REFERENCE. FAILURE TO FOLLOW DIRECTIONS PROPERLY MAY RESULT IN DAMAGE.
ONLY use this product for the detection of moving objects such as people and vehicles.
DO NOT disassemble or attempt to repair the product.
DO NOT install this unit with any other infrared detector. It may cause false alarms.
DO clean and inspect the unit regularly for proper use. If any problem is found, contact
Dakota Alert, Inc.
WARNINGS: This device complies with Part 15 of the FCC rules, Operation of this device is
subject to the following conditions: 1. This device may not cause harmful interference. 2.
This device must accept any interference, including interference that may cause undesired
operation.
HARDWARE INSTALLATION
Verify that all installation hardware
is included. Tools needed: Phillips
screwdriver, adjustable wrench.
(8) M4x12mm screws
(8) M4 nuts
(8) M5x27mm screws
(8) M5x18mm screws
(16) M5 nuts
(4) Cross Brackets(4) Right Angle Brackets (4) ‘U’ Shaped Brackets
2