Filter
Top Products
12 13
HOW TO RESET THE AUTO DIALER
Inside the battery compartment:
Remove the power supply and the Auto Dialer from the wall. Remove the 9V battery. Inside
the battery compartment is a switch. Move it to the ERASE position. Connect the power to
the Auto Dialer then press DELETE twice. There will be 2 short beeps from the Auto Dialer.
Switch the power o again. Place switch back to NORMAL. Replace the 9V battery and
place back onto the wall. Power the Auto Dialer back up. The Auto Dialer will then return to
factory default setting.
NOTE AND CAUTION:
A leaking battery will result in poor performance and could damage the system. It is
recommended that the batteries be periodically checked. Change the batteries at least
once a year to maintain the system.
DO NOT mount the Auto Dialer in areas that are exposed to extreme heat or moisture, as
this could adversely aect the performance of the system.
Use only a damp cloth and general household cleaning agent to wipe the unit clean. DO
NOT use turpentine, thinner, gasoline or similar substances to clean the unit.
AD-01 Slave Manual.indd 13 10/15/2009 10:20:45 AM