Filter
Top Products
14
1.Press the ON/OFF button on the
remote control to turn the unit
on; the On LED will light on the
indoor unit and “ON” will light in
the remote display.
2.Press the MODE button to select the
desired mode. Then, set the desired
temperature using the TEMP. or
buttons.
3. Press the SLEEP button on the remote
controller. The unit will then be in the sleep
mode and will cool the room to the desired
temperature. After a while the unit will in-
crease the temperature again in the cooling
mode or decrease the temperature in the heat mode of
the heat pump. This process will then repeat.
TO SET SLEEP MODE
When you are going to sleep, select this feature and the unit will cool off the room to the desired temperature and then
increase that temperature throughout the night.
1.Open the indoor unit’s cover and make sure the
EMERGENCY/REMOTE switch is set to the EMER-
GENCY position.
3.
To turn the unit off, slide or push the
EMERGENCY/ REMOTE switch to the REMOTE position.
2.The unit will then turn on and depending on the room
temperature, it will select the cool or heat, fan speed
and fan direction automatically.
EMERGENCY OPERATION
If the remote control is lost, broken or has no batteries, follow the procedures below:
TO CANCEL SLEEP MODE:
To cancel sleep mode,
press the SLEEP button
again; the SLEEP indicator
will disappear in the dis-
play.
AUTO
1. The unit is fixed “MILD” mode on production.
2. Press the “TURBO/MILD” button for powerful cooling.
3. When press the “TURBO/MILD” button one more time, it will be back to “MILD” mode.
TO SET TURBO/MILD MODE
EMR. REMOCON
EMERGENCY/REMOTE Switch