Filter
Top Products
9
CELSIUS TO FAHRENHEIT CONVERSION CHART
CELSIUS FAHRENHEIT
18 64.4
19 66.2
20 68
21 69.8
22 71.6
23 73.4
24 75.2
25 77
CELSIUS FAHRENHEIT
26 78.8
27 80.6
28 82.4
29 84.2
30 86
31 87.8
32 89.6
1. Slide down the cover to access
most of the remote buttons. Slide
down further to access the battery
compartment.
2. Insert two “AAA” size
Alkaline batteries follow-
ing the polarity diagram
below.
ON/OFF
TIMER
ENTER/
CANCEL
TURBO/MILD
+–
+–
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufac-
turer’s directions).
HOW TO INSTALL BATTERIES
To install the batteries, follow the procedures below:
CAUTION-IN CASE OF OPERATING TWO UNITS
the operation mode of the remote controller
As shown above, When the “CASE I” is selected, only the indoor unit which is received the first signal from the re-
mote controller operates and the other indoor unit doesn’t operate.
also, you can see the blink of indicators of the latter.
in that case, try to select one out of the “CASE II” again.
indoor unit B1
indoor unit B2
Operation
Fan
Heating
Heating
Fan
Cooling
Heating
Heating
Cooling
Fan
Cooling
Cooling
Fan
Cooling
Cooling
Cooling
Dehumidification
Dehumidification
Cooling
Heating
Heating
CASE I
No Good
CASE II
Good