Filter
Top Products
INSTALLATION AND OPERATION MANUAL
MF3700, MF3800 Models
Page 10 800-345-6007
CumberlandStoveWorks.com
MOUNT DOOR
Take off protective cardboard. Hang door on hinges
making sure it’s seated properly so latch is aligned with
latchcut-out.
LATCH ADJUSTMENT
The door gasket may settle after use and adjustment to
latch is necessary to ensure proper seal. To adjust latch
remove roll pin and swap washers from the inside of door
to the outside of the door. Replace roll pin and inspect
doort.
MOUNTING THE CONTROLLER
The CSW MF Series Stove has three different controller
mountingoptions:
1. Back of the stove with controller visible.You may mount
theconrollteroneithersideoftherearofthestove(see
gure8)soitisvisibleduringoperation.Todosousethe
metalmountingbracketandthe(4)self-tappingscrews((2)
throughtheplasticbracketand(2)throughthebackpanel
ofthestove).Attachthroughthepre-drilledholes.
Note: Self-tapping screws must penetrate hopper.
2. Back of the stove with controller hidden. You may mount
thecontrolleroneithersideofthestove(seegure9).Soit
is not visible during operation. Attach the plastic mounting
brackettothepre-drilledholesoneithersideofthestove
usingthe(2)self-tappingscrews.
Note: Self-tapping screws must penetrate hopper.
3.Wallmounted(gure10).Youmaymountthecontroller
onthewallnexttotheunitusingtwodrywallscrews.Itis
besttoembedthescrewsintoastud.Useastudnderto
locate studs in the wall.
PLUG STOVE INTO CONTROLLER
After mounting the controller plug the phone cord from the
back of the stove to the underside of the controller.
Figure8:Controlleronmetalbracketinback.
Figure9:Controlleronplasticbracketinback.
Figure10:Controlleronwall.
Figure11:DoorLatchAdjustment.