Filter
Top Products
7
The humidifier will switch ON and OFF using the preset hours. To switch the
humidifier OFF during the cycle ON/OFF period, press and hold the CANCEL button
until the humidifier switches OFF.
NOTE: If the double arrows (cycle symbol) blink several times, the times was not set
correctly. Please repeat the Setting Cycle Function procedure.
Deactivating Cycle Function
1. Press and hold the POWER / CANCEL button.
Automatic On/Off Function
The Automatic On/Off Function should be used if you want the humidifier to turn on and
off at a specific time of day.
Note: This function cannot be used in conjunction with the Cycle
Function.
Setting Automatic On/Off Function
1. Press and hold the FLOW / SET button until the first two numbers blink.
2. If the clock was not set, please set clock now before continuing with Automatic
On/Off function (see “Setting the Clock”).
3. Once the clock is set, press FLOW /SET button until the AUTO appears on the
LCD display. At this point the first two numbers will blink.
4. Press the LIGHT / FUNCTION button to set the Automatic ON hour.
5. Press the FLOW / SET button and the minutes will blink. Press the LIGHT /
FUNCTION button to set the Automatic ON minutes.
6. Press the FLOW / SET button to get into the Automatic OFF setting mode. Set
the hour and minutes in the same way as the Automatic ON.
Activating and Deactivating the Automatic On/Off Function
1. To activate the Automatic On/Off Function, press and hold for two seconds the
LIGHT / FUNCTION button until the double arrow appears. Then press the LIGHT
/ FUNCTION button until the word AUTO appears on the display.
2. To deactivate the Automatic On/Off function, press and hold the POWER /
CANCEL button.
Alarm Function
The humidifier can be used as an alarm clock. To set the alarm clock the humidifier
must be in the OFF mode. The alarm clock can be used in the ON or OFF mode.
Setting the Alarm
1. Press and hold the FLOW/SET button until the first two numbers blink.
2. If the clock was not set, please set clock now before continuing with cycle
function (see “Setting the Clock”).
3. Once the clock is set, press the FLOW / SET button until the Auto and the Clock
symbol appear in the LCD display. At this point, the first two numbers will blink.
Note: You will need to click through other functions to reach the Auto and Clock
symbols.
4. Press the LIGHT / FUNCTION button to set the hour.
5. Press and hold the FLOW / SET button until the minutes begin to blink. Press the