Filter
Top Products
CertainTeed Vinyl Siding Installation Guide
64
Blind Miter
An alternative to a standard blind miter offers support to the corner
without adding material. The measurements shown for the fold are
for a 5" lineal. The same method can be used with 3-1/2" lineals,
but the fold would be changed from 1-1/2" to 1-3/8".
Lineal Frieze Board
45˚
lineal
starter
cornice
molding
cornice
receiver
1/4"
1/4"
panel
5" lineal
3/4"
Measure at least
1-1/2" and notch
with snips
Measure and
notch 1-1/2"
Dotted line represents
the position of a 45˚
mitered 5" lineal
Remove
this corner
(dimension
dependent on
1/2" minimum
shown below)