Coway BA08-AE Plumbing Product User Manual


  Open as PDF
of 36
 
5
For Information
When you don’t use for a
long time, close the main
water supply valve and
unplug.
Otherwise,electricshockorre
mayoccurasaresult.
Do not attempt to repair or
modify the power cord at
your discretion.
Otherwise,electricshockorre
mayoccurasaresult.
In the case the power cord is
damaged, do not replace the
cord yourself. Call Service
Center to have it replaced.
Otherwise,electricshockorre
mayoccurasaresult.
Installation Safety
Do not install near a heating
device.
Otherwise,remayoccurasa
result.
Avoid installing the product
in places where the air is
damp, dust is accumulated,
or water drops.
Otherwise,electricshockorre
mayoccurasaresult.
Do not place or use the
inammable gases, nor the
ammable materials near
the product.
Otherwise,electricshockorre
mayoccurasaresult.
Use tap water as a main
water.
Industrialwaterorgraywater,if
usedasmainwater,maycauseskin
damageordiseases.
Don’t connect the main
water to the warm water
pipe.
Otherwise,malfunctionsor
accidentsmayoccurasaresult
(Makesuretoconnecttocoldmain
watersupplypipe).
After installation, make sure
to check the water supply
connections for leaks.
Rubberpackingshouldbeapplied
totheconnectionhose.
Do not install the bidet in a
location exposed to direct
sunlight.
Otherwise,deformationor
discolorationmayoccurasaresult.
SAFETY INFORMATION
|
Electricity Safety
|
Installation Safety
Danger Warning Caution
A/S
Don’t use!
Industrialwater
orgraywater
Tapwater
Don’t connect!
Warmwaterpipe
Coldwater
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 5 2009.6.10 6:16:27 PM
 previous next