Coway BA08-AE Plumbing Product User Manual


  Open as PDF
of 36
 
26
CLEANING METHOD
Uninstallation the product
1. Unplug the power plug from the outlet.
2. Close the main water supply valve.
3. Place a big wash basin (1 L or more) under the rear
drain hole of the bidet.
4. Turn the drain stopper to
1
counter clockwise by 90 °
and pull out it in the direction of
2
to remove it.
- Pleaseassemblethedrainstoppertotheproductagainafter
draining.
5. Please separate the product by removing the xing
nuts in the xing screw and lifting the bidet.
- Pleasepulloutthepowerplugandseparatethebidethosefrom
T-shapedconnectorbeforeseparatingtheproduct.
- Whenstoringtheproduct,separatethelterxedstopperandMF
lterfromthebidetandstorethemwithinstallationmaterials.
- Exercisecautionnottolosexingscrewsandxingnuts.
Whenyoudon’tusetheproductforalongtime,unplugafterturningothemainwater
supplyvalveandemptyingthewaterinsidethewatertank.
Tips
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 26 2009.6.10 6:17:3 PM
 previous next