Filter
Top Products
20
INSTALLATION
Installation the Product
5. Please install by adjusting the rear of the body to the
fixing plates and pushing the product back.
6. Connect the T-shaped connector and the connected
bidet hose to the bidet body.
Please shorten the bidet hose as soon as possible. If the bidet
hose is long, it may cause noises.
7. Open the main water supply valve.
8. Connect the power plug to the electrical outlet.
Make sure to use a grounded electrical outlet. In the case of short
circuit, grounding prevents electric shock or injury.
Make sure to use a dedicated electrical outlet with grounding
terminals.
If it is unavoidable to use an extension cord, use one with
grounding terminals for power rating of 250 V, 7 A or higher.
Grounding
terminals
1014692 BA07 »ç¿ë¼³¸í¼- ¹ÌÁÖÇâ_(08.09.10).indd 20 2008-09-10 ¿ÀÀü 11:37:13