Filter
Top Products
17
How To Use
HOW TO USE
|
For Rear Cleansing
|
For Front Cleansing
For Front Cleansing
Front cleansing
Sit on the seat and press the front cleansing function selection button on the
remote control.
- The cleansing water is ejected for about 1 minute and then automatically
stopped.
- An automatic nozzle cleaning is performed for about 5 seconds after
cleansing when the nozzle retracts itself.
Adjust the nozzle position by pressing the nozzle position button.
If the front cleansing function selection button is pressed again while in
cleansing operation, additional front cleansing starts again for another 1
minute.
While in cleansing, users can adjust the water temperature, water pressure,
and nozzle position according to their preference.
Move
Press the move function selection button on the control panel.
- The nozzle moves back and forth, providing a wider range of cleansing.
It will be worked continuously while the cleansing function is operated.
You can adjust the nozzle position by pressing the nozzle position
button.
To stop the move function, press the move function selection button
again.
Air dryer
Press the air dryer function selection button on the remote control.
- Warm air blows for about 2 minutes to dry the wet part.
If you wipe out the wet before turning on the air dryer function, you can
finish drying faster.
You can adjust the air dryer temperature by pressing the water pressure air
dryer buttons.
If the air dryer function selection button is pressed again while in drying
operation, additional drying starts again for another 2 minutes.
If the air dryer function selection button is pressed while in cleansing
operation, the cleansing function is stopped and drying starts immediately.
Stop
If you want to stop the operation in use, press stop button.
- It stops all operating functions.
The air dryer function is stopped in 2 seconds after pressing the stop
button.
1014692 BA07 »ç¿ë¼³¸í¼- ¹ÌÁÖÇâ_(08.09.10).indd 17 2008-09-10 ¿ÀÀü 11:36:59