Coway BA07-R Plumbing Product User Manual


 
18
INSTALLATION
Installing the product
Tighten the fixing screws firmly so that the bidet body won’t be shaky on
the toilet.
Product installation place
As the bidet is installed on the toilet, please install not to have water
splashed on the bidet.
After installation
Keep the removed existing toilet seat in a shaded place to prevent its
damage.
Cold water pipe
Make sure to connect the bidet to cold water pipe (If the product is
connected to warm water pipe, the filter and hoses of the bidet may be
damaged).
To maintain the optimal product performance, consult a Coway engineer for
detailed installation methods.
There may be some water remaining inside the filter which was used to test the
product during the inspection process at the factory.
- The remaining water does not mean that the product was previously used.
Tips
TipsKeep the
existing toilet
seat in the shaded
place
Warm
water
1014692 BA07 »ç¿ë¼³¸í¼- ¹ÌÁÖÇâ_(08.09.10).indd 18 2008-09-10 ¿ÀÀü 11:37:05