Filter
Top Products
12
PREPARATIONS
After installation
Please check whether the water leaks or not in the connection part
of the T-shaped connection pipe. You must insert the rubber packing
between the T-shaped connection pipe, the water pipe, and the
water tank hose.
Periodic filter replacement
It is important to replace the filter periodically for the clean rinsing.
If the filter is overused beyond its service life, the filter performance
deteriorates, resulting in cleansing water that is not filtered properly.
Please keep the filter replacement cycle.
Filter replacement cycle : Every 4 months
If the bidet has not been used for a long time
When you don’t use the product for a long time, use it after replacing
the filter and cleaning the products such as an air dryer outlet, a
nozzle, a seat according to each cleaning methods (See P.21).
This product is for 120 V~ 60 Hz only.
Please connect the power plug to a dedicated grounded
electrical outlet for 120 V~ 60 Hz .
Tips
Remove the protective film from the control panel before use.
Tips
1014692 BA07 »ç¿ë¼³¸í¼- ¹ÌÁÖÇâ_(08.09.10).indd 12 2008-09-10 ¿ÀÀü 11:36:42