Coway BA07-E Plumbing Product User Manual


 
10
PARTS NAME
Installation Material
Grounding
This product must be grounded, in the event of an electrical short circus, ground reduces the risk of electrical
hazards by providing an escape wire for the electric current. The power cord has grounding wire and a three-
blade grounding plug (shown below). Do not use an adapter with the product’s power plug, or use any other
methods to connect the plug to an improperly configured outlet. The Power source to which the product
connected must be 120 V, 60 Hz with an minimum current rating of 10 A. The outlet must be properly
installed and grounded, and have three slot receptacle (shown bellows). If it is necessary to use an extension
cord, use only a three wire extension cord that has a three-blade grounding plug. The extension cord must be
rated 120V, 10A.
Improper use of the grounding plug can result in a risk of electric shock.
2 pc of Fixing screws
2 pc of Fixing rubbers
2 pc of Fixing washers
2 pc of Fixing nuts
Fixing plate,
2 pc of Fixing
sliders
Bidet hose
T-shaped
connector
Nano silver
ceramic MF
filter
Rubber
packing
Grounding
pin
Grounding
outlet
1014692 BA07 »ç¿ë¼³¸í¼- ¹ÌÁÖÇâ_(08.09.10).indd 10 2008-09-10 ¿ÀÀü 11:36:34