Conair UGH016/0500 Air Conditioner User Manual


 
S
TOPPING THE
CHILLER
Series 1 Portable Chillers, TIC Control UGH016/0500
3-12
INSTALLATION
To stop the chiller, press the Stop Chiller button on the control
panel.
NOTE: When you press the Stop Chiller button, the pump and
compressor both stop. If you want to restart immediately by
pressing the Start Chiller button, the pump will turn on but the
compressor will not turn on for three minutes. The Process
Pump light on the control panel will light immediately. After
three minutes the compressor turns on and the Compressor
light on the control panel lights. This allows temperatures and
pressure to equalize, making restart easier, and prolonging the
life of the chiller.
If the chiller is not working properly at any time, stop the
chiller and refer to the Troubleshooting section. If you do not
encounter any problems, proceed to the Operation section.