Conair UGH016/0500 Air Conditioner User Manual


 
Series 1 Portable Chillers, TIC Control UGH016/0500
2-8
DESCRIPTION
P
ORTABLE
CHILLER
FEATURES
Receiver
stores the liquid refrigerant.
Filter dryer
cleans and dries the refrig-
erant.
From Process valve
Relief valve
acts as a safety
device for refrig-
erant pressure.
Condenser
compresses the
refrigerant from a
high pressure vapor
into a high pressure
liquid.
Liquid line solenoid
valve
pumps down refrigerant
to the receiver.
Temperature trans-
mitter electrical box
transmits temperature
signals to the control
Process pump
circulates fluid through
the chiller.
Compressor
compresses the refrig-
erant from a low pres-
sure vapor into a high
pressure vapor.
Hot Gas Bypass valve
balances the load on the
chiller to meet the needs of
the process.
To Process valve
TX valve
regulates refrigerant flow
Evaporator
cools the To Process fluid
Pump reservoir
stores process fluid. View fluid
level on water level gauge
Options include:
60 Hz process pump
1 1/2 Hp for W1-1.5, W1-2
2 Hp for W1-3, W1-4
3 Hp for W1-5, W1-7.5, W1-10, W1-15
To Process and From Process valves
Process bypass line and valve
No reservoir/pump
No reservoir
Auto fill reservoir
Condenser water differential pressure switch (W1-7.5 to
W1-15 only)
Visual alarm
Audible alarm
Remote/redundant hand control with 30 ft. cable
Remote/redundant hand control with 50 ft. cable
UL labeled controls
Water-cooled Models