Filter
Top Products
English - 5
To Turn Off
To Clean
■ Make sure stove
is cool.
■ Move stove
away from ame
(including pilot
lights) and other
ignition sources.
■ Remove propane
cylinder from
regulator
and replace
protective cap
on cylinder.
(Fig. 16)
■ Remove
regulator from
stove. (Fig. 17)
■ Lift off pot
support. (Fig. 18)
MAINTENANCE
• Keep stove area clear and free from
combustible materials, gasoline and
other flammable vapors and liquids.
• Do not obstruct the flow of
combustion and ventilation air.
• A good flame should be blue with
minimal yellow tip. Some yellow tips
on flames are acceptable as long as
no carbon or soot deposits appear.
• Wipe clean with soft cloth and mild
dish detergent. Do not use abrasives.
(Fig. 19)
INSTASTART™
Electronic Ignition Stove
■ Set on
sturdy, at
surface. For
outdoor
use only.
■ Open burner
valve and
rotate ignitor
knob several
times until
burner
lights. (Fig.
12 and 13).
Note: If igniter
fails to light
stove, use
match to light
burner. If the
stove is wet the igniter may not spark.
■ Adjust ame
with burner
valve.
(Fig. 14)
Flame
should be
blue with
a hint of
yellow
on tips.
■ Close both
burner
valves rmly.
(Fig. 15)
Fig. 19
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 12
Fig. 13
Fig. 14