Filter
Top Products
5-7
Installation Guide for the Cisco Secure PIX Firewall Version 5.2
78-11180-01
Chapter 5 Opening a PIX Firewall Chassis
Opening a PIX Firewall Classic
Figure 5-9 Opening the Front Panel Provides Access to the Power Switch
Step 4
At the back of the PIX Firewall unit, remove the power cord and if you are replacing a board, any
cabling related to it.
Step 5 Remove the unit from the equipment rack and place it on a stable work surface.
Step 6 Detach the top panel by using a Phillips-head screwdriver to remove the 16 screws securing the top
panel (12 on top and 4 on the rear cover flange) as shown in Figure 5-10.
Figure 5-10 Removing the Top Panel Screws
Step 7
Remove the top panel.
H7484
P
O
W
E
R
R
E
S
E
T
Power
switch
Reset switch
Diskette
drive
Diskette eject button
Power
light
H7485
Top panel screws (16)