Filter
Top Products
5-5
Installation Guide for the Cisco Secure PIX Firewall Version 5.2
78-11180-01
Chapter 5 Opening a PIX Firewall Chassis
Opening a PIX10000
Closing a PIX 510 and PIX 520 Chassis
Replace the top panel, as shown in Figure 5-6, and secure it with the three screws you removed in
Step 3 in the previous section.
Figure 5-6 Replacing the Top Panel
Opening a PIX10000
Follow these steps to open a PIX10000 chassis:
Step 1 Power off the unit from the rear panel.
Step 2 Remove the four screws from the top panel at the rear of the unit.
Step 3 Grasp the top panel with both hands as shown in Figure 5-7 and pull the top panel backward one inch
toward the rear of the cabinet and then lift the top panel straight up.
Figure 5-7 Opening the PIX10000 Chassis
PIX Firewall
SERIES
RESE
T
10380
H10128