Cisco Systems PIX 506E Water Heater User Manual


 
6
5 Check the LEDs
If all LEDs are operating as expected (see Table 1 and Table 2), this concludes the hardware
installation. The pages that follow include instructions on running PDM and additional optional
procedures.
Table 1 PIX 506/506E Front Panel LEDs
LED State Description
POWER Green The device is powered on.
Off The device is powered off.
ACT Flashing green The software image has been loaded.
Off The device is powered off.
Network Flashing green One or more network interfaces are passing traffic.
Off No network interfaces are passing traffic.
Table 2 PIX 506/506E Rear Panel LEDs
LED State Description
ACT On Network activity is present on the port.
Off No network activity is present on the port.
CISCO PIX 506E
FIREWALL
67933
POWER ACT NETWORK
Insert picture of 506/506E here.
ACT
LINK
LINK
DC
POWER
INPUT
ACT
CONSOLE
ETHERNET 0
USB
ETHERNET 1
78186