Filter
Top Products
5
4 Power On the PIX 506/506E
Follow these steps to power on the PIX Firewall:
Step 1 Connect the small, square connector of the power supply cable to the power connector on the
rear panel.
Step 2 Connect the AC power connector of the power supply input cable to an electrical outlet.
Step 3 Set the power switch to the on (|) position.
ETHERNET 0
ETHERNET 1
CONSOLE
LINK
DC
POWER
INPUT
USB
ACT
LINK
ACT
Cisco PIX 506E
DC
POW
ER
INPUT
67932
Power supply