Filter
Top Products
Manual Installation Procedures 3-9
Running the install_config Program
Processing package information.
Processing system information.
Installing Cisco WAN Manager 9.2.06.SOL for HPOV as <CSCOsv>.
## Installing part 1 of 1.
/usr/users/svplus/.Xdefaults
/usr/users/svplus/.cshrc
/usr/users/svplus/.cshrc.contrib
.
.
.
/usr/users/svplus/xnmevents_ibm.contrib
[verifying class <none>]
## Executing postinstall script.
Installation of <CSCOsv> was successful.
Installing the Installation Script
Welcome to the Installation of Cisco WAN Manager Release 9.2.06.SOL Wed Oct 14 17:49:51
PDT 1998
Raw device name: /dev/rdsk/c0t2d0s7
Checking existence of the sqlhosts file .... Successful
Checking existence of the informix_istar entry.... Successful
Checking for the existence of Informix............ Successful
Checking for the existence of Wingz............... Successful
Wingz is not installed properly under /usr/users/Wingz.
After Cisco WAN Manager installation, install Wingz under
/usr/users/Wingz and then run IntegrateWingz.
Truncating the Informix root database size to maximum allowed 2 GB.
Installation Type for Cisco WAN Manager Release 9.2.06.SOL
--------------------------------------------------
(1) NEW (Release 9.2.06.SOL of SV+)
(2) UPGRADE (From previous release of SV+)
Enter number corresponding to installation type or x to exit: 1 <Return>
Checking existing partition....................... Successful
Available partitions (Solaris):
================================
/dev/rdsk/c0t4d0s7 (1960 MB)
Checking Hard Disk count.......................... Successful
Disk Configuration Migration to Cisco WAN Manager Release 9.2.06.SOL
1) Single Raw Database Disk
2) Multiple Raw Database Disk
x) To Exit