Filter
Top Products
Installing Cisco WAN Manager Manually
Cisco WAN Manager Installation for Solaris, Release 9.2, Part Number 78-5875-03
3-4
Installing Cisco WAN Manager Manually
For the manual installation of CWM Release 9.2 to complete successfully, you must have:
• Solaris 2.6 operating system installed on your workstation
• When you plan on using HP OpenView to display network topologies and log traps, you must
have HP OpenView 5.01 installed on your workstation prior to installing CWM 9.2. To fully
benefit from the CWM 9.2 feature set, we strongly recommend you install HP OpenView 5.01.
Note, patch PSOV_02091 is required. This patch is provided on the CWM 9.2 CD and is installed
by the CWM installation program when the patch is not already installed on the workstation.
• Access to the following product packages on the CWM Release 9.2 CD:
— CSCOconf - Configuration files
— CSCOinf - Informix OnLine 7.2 files
— CSCOsv - CWM 9.2 for HP OpenView files
• Access to Wingz 2.5.1 (optional - only when you plan on using the CWM Reports application).
This application is available on a separate CD included in your CWM 9.2 product package. Note,
you must install Wingz files in the /usr/users/Wingz directory.
• Access to CiscoView 4.2 (optional - only when you plan on using the CWM Equipment
Management functionality for BPX/IGX release 9.1 or for AXIS 4.0/4.19.1.04). This application
is available on a separate CD included in your CWM 9.2 product package.
Installing Cisco WAN Manager
Before installing CSCOsv, make sure you have sufficient free disk space. The CSCOsv software
package requires at least 400 MB of free disk space.
To perform an initial installation of CWM 9.2, complete the following steps:
Step 1 If you are not already logged in as user root, do so now.
Step 2 Insert the CWM Release 9.2 CD into the CD-ROM drive.
Step 3 The installation of the CWM 9.2 for HP OpenView package files is complete.