Filter
Top Products
Manual Installation Procedures 3-5
Installing CSCOconf
Installing CSCOconf
Following is an excerpt from the CSCOconf installation script. Respond to the prompts as
appropriate. The default response is shown in boldface type. You must be logged in as root.
Step 1 Insert the CWM 9.2 CD into the CD-ROM drive.
Step 2 Log in as user root.
Step 3 When the CD-ROM drive is not already mounted, or you are not running the Volume
Manager with Solaris on a Sun SPARC system, at the command line prompt, type:
host# volcheck
Step 4 At the command line prompt, type:
host# pkgadd -d /cdrom/cdrom0 CSCOconf
The CSCOconf package installation process is initiated:
Processing package instance <CSCOconf> from </cdrom/sv920msol>.
Cisco WAN Manager 9.2.06.SOL Configuration
(sparc) 9.2.06.SOL
Cisco WAN Manager 9.2.06.SOL
Copyright (c) 1996, 1997, 1998, 1999 Cisco Systems, Inc. All rights reserved.
This software product is copyrighted and all rights are reserved by
Cisco Systems, Inc. Cisco Systems, Inc. reserves the right to make periodic
modifications to this product without obligation to notify any person
or entity of such revision. Copying, duplicating, selling, or otherwise
distributing any part of this product without the prior written consent
of an authorized representative of Cisco Systems, Inc. is prohibited.
IPX, BPX8600, MGX8220, MGX8850, and FastPacket are registered trademarks and
Cisco WAN Manager is a trademark of Cisco Systems, Inc.
The selected base directory </var/SVconfig> must exist before
installation is attempted.
Step 5 When asked if you want to create the /var/SVconfig directory, reply yes.
Do you want this directory created now [y,n,?,q] y <Return>
Using </var/SVconfig> as the package base directory.
## Processing package information.
## Processing system information.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Step 6 When asked if you want to continue with the installation of CSCOconf, reply yes.
Do you want to continue with the installation of <CSCOconf> [y,n,?] y <Return>
Installing Cisco WAN Manager 9.2.06.SOL Configuration as <CSCOconf>.
## Installing part 1 of 1.
/var/SVconfig/Accounts.pack/Install.sh
/var/SVconfig/Accounts.pack/PostInstall.sh
/var/SVconfig/Accounts.pack/PreInstall.sh
.