Filter
Top Products
3-6
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
OL-18362-01
Chapter 3 Installing the Cisco ASA 5505
Rack or Wall Mounting the Cisco ASA 5505
Step 6 Remove the three screws from the bottom of the adaptive security appliance as shown in Figure 3-13.
Discard these screws as you will not need them.
Step 7 Place the wall-mount bracket on the adaptive security appliance. Use the three screws provided in the
accessory kit to screw the wall-mount bracket to the adaptive security appliance as shown in Figure 3-13.
Figure 3-4 Removing and Replacing the Screws
Step 8
Pick up the adaptive security appliance with the wall-mount bracket facing the wall, align the screws in the
anchors with the holes in the brackets.
191806