Filter
Top Products
3
Prepare Opener
5
For left hand side installations
the wire jumper should be removed.
Place the Opener in Manual Release mode.
Disengage:
Pull the release cord down once until you hear a
clicking sound. The operator is now in manual mode
and may be opened or closed.
Engage:
To re-engage the opener, pull the release cord down
until you hear a clicking sound, the motor is now ready
for operation.
Note: The drive forks may now be positioned into
the drum as required.
For right hand side installations
the wire jumper should be in place
(factory installed).
Set Opener Position (Left or Right hand)
Rope
Manual Release
Warning Label
Release handle
Attaching the Extension Poles (if required)
1. Insert the extension poles into the gear
2. Align the extension pole holes with the gear holes
3. Using the supplied screws secure the extension poles
.