Filter
Top Products
10
Step 3a. Locate and loosen the two motor housing
mounting screws that are located on the side of the
ceiling mounting bracket as shown in Figure #1.
Step 3b. Install the motor housing by aligning the
two slots on the inside of the motor housing with the
heads of the two mounting screws that are mounted
on each side of the ceiling mounting bracket as shown
in Figure #2. Then rotate the motor housing counter
clockwise until the heads of the two screws on the
ceiling mounting bracket lock together, attaching the
motor cover to the ceiling plate as shown in Figure
#3.
NOTE: When aligning the screws, center the motor
housing so that there is an even amount of space all
around the motor.
Motor Housing
Screw Pack (B)
Motor Housing Mounting
Screws (2)
Screw Pack (B)
Hole Plugs (4)
MOTOR HOUSING INSTALLATION
CEILING BRACKET HARDWARE (not to scale)
Ceiling
Mounting
Bracket
Motor Cover
Mounting Screws
Mounting
Slots
Motor Cover
Mounting Screws
Figure #1
Figure #3
Figure #2