Filter
Top Products
DV Power Vent System
12
10003262
3.3 - Adding Deflectors to the Side Wall Vent Termination:
1. Open the plastic bag and check all components.
(One Top Deflector, one Bottom Deflector, four self-tapping screws)
2. Install the bottom deflector using two screws provided with the kit. Refer to Figure A.
3. Open the top screen and install the top deflector. Refer to Figure B. Attach the top deflector using two screws
provided with the kit.
4. After installing the top and bottom deflectors the vent termination should look like Figure C.
5. Close the top screen to the same way it was before.
A
B
C
CFM512
CFM513
CFM514