Filter
Top Products
13
Dutchwest Natural Vent Gas Heater
30002008
Operation
Your First Fire
Read these instructions carefully and familiarize your-
self with the burner controls. Locate the pilot assembly,
Figure 25. Follow the lighting instructions on Page 14
exactly.
During the first fire, it is not unusual to smell some
odor associated with new logs, paint and metal being
heated. Odors should dissipate within an hour or so,
however, you can open a window to provide fresh air to
alleviate the condition.
Pilot and Burner Inspection
Each time you light your heater check that the pilot
flame and burner flame patterns are as shown in Fig-
ures 26 and 27. If flame patterns are incorrect, turn the
heater off. Contact your dealer or a qualified gas techni-
cian for assistance. Do not operate the heater until the
pilot flame is correct.
Follow regular maintenance procedures as described
on Page 19.
ST769
Dutchwest
pilot location
5/15/03 djt
Fig. 25 Pilot Assembly location.
ST769
Pilot As-
sembly
LG143
Fig. 27 Correct burner flame pattern.
LG142
Stardance
Install logs 2
12/1
1/00 djt
Red Glow
CO105c
Fig. 26 Correct pilot flame pattern.
CO105c
Pilot flame
4/10/00 djt