Filter
Top Products
8
CANOPY
COVER
DISASSEMBLE CANOPY AND MOTOR COVERS
Step 11. Take the two pieces of the
canopy cover and assemble them around
the downrod as shown. Using the four
screws removed in Step 10, assemble the
canopy cover.
Slide the canopy cover to the ceiling and
secure to the downrod using the two pro-
vided screws. Tighten by hand only.
INSTALL CANOPY COVER
Step 12. Take the two pieces of the mo-
tor cover and assemble them around the
downrod as shown. Using the two screws
removed in Step 10, assemble the motor
cover.
Slide the motor cover down onto the top
of the fan and secure to the downrod us-
ing the two provided screws.
Using the screwdriver, tighten securely
by hand only.
INSTALL MOTOR COVER
Step 10. Remove the screws from the canopy cover and
the motor cover and set aside for later use.
MOTOR
COVER
CAUTION: The canopy cover can NOT be used
on sloped ceilings.
CANOPY
COVER
SCREWS FROM
STEP 10
PROVIDED
SCREWS
SCREWS FROM
STEP 10
PROVIDED
SCREWS