Filter
Top Products
9
ATTACH BLADE HOLDERS
Step 13. Attach the blades to the blade holders by align-
ing the screw holes of the holder with the holes of the
blade.
Attach the blade holder using the four blade screws and
blade washers provided for each blade.
Using the screwdriver, tighten securely by hand only.
BLADE
SCREW
BLADE HARDWARE
BLADE
WASHER
BLADE
HOLDER
BLADE
BLADE
SCREW
BLADE
WASHER
INSTALL BLADE ASSEMBLY
Step 14. Remove the blade holder screw from the fan.
Slide the blade assembly into the cross bar, assuring that
the alignment holes line up.
Reinstall the blade holder screw, making sure that the
blade assembly is secure and does not rotate when turned.
Using a wrench or pliers, tighten securely by hand only.
BLADE HOLDER
SCREW
ALIGNMENT
PIN
BLADE
ASSEMBLY
BLADE
HOLDER
SCREW
ALIGNMENT
HOLES
19
th
Century
™